Defrost control, Installing your dehumidifier, Choosing the proper location – Kenmore 580.513 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INSTALLING YOUR DEHUMIDIFIER

Install the dehumidifier on a level floor strong

enough to support the unit \with a full bucket

of water.

■ For best performance, allow at least 12-18

inches of air space on ail sides of the unit for

good air circulation.

' Keep all outside doors, windows, and other

openings closed when operating the

dehumidifler. Humid outdoor air will add to the

unit's work load.

■ Install your dehumidifier in an area where the

temperature will not fall below 65°F (IS^C). At

temperatures below this, the coils can

become covered with frost.

DEFROST CONTROL

When the defrost control senses frost build-up

on the evaporator coil, it will automatically

shuts off the compressor. The fan will continue

to cycle on and off to draw air across the coil

and melt the frost. When the coil is defrosted,

the compressor will automatically restart and

dehumidifying resume.

J-65'F

i 08'C)

CHOOSING THE PROPER LOCATION

Use the dehumidifier in a basement to help

prevent moisture damage.

Use the dehumidifier in cooking, laundry,

bathing, and dishwashing areas that have

excessive moisture.

Use the dehumidifier to prevent moisture

damage anywhere books or valuables are
stored.

- 7 -

Advertising