Dryer care, Important, Awarning – Kenmore ELITE OASIS 110.6703 User Manual

Page 24: Cleaning the lint screen

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DRYER CARE

Keep dryer area clear and free from items that would obstruct the

flow of combustion and ventilation air.

AWARNING

U/

Explosion Hazard

Keep

flammable materials and vapors, such as

gasoline, away from dryer.

Place dryer at least

18

inches (46 cm)

above

the floor

for a garage installation.

Failure

to do so can result in death,

explosion,

or fire.

IMPORTANT:

Do not run the dryer with the lint screen loose, damaged,

blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.

If lint falls off the screen into the dryer during removal, check

the exhaust hood and remove the lint. See “Venting

Requirements.”

As needed cleaning

Laundry detergent and fabric softener residue can build up on the
lint screen. This buildup can cause longer drying times for your

clothes, or cause the dryer to stop before your load is completely
dry. The screen is probably clogged if lint falls off while the screen

is in the dryer.

Clean the lint screen with a nylon brush every 6 months, or more

frequently, if it becomes clogged due to a residue buildup.

To wash

1. Roll lint off the screen with your fingers.

2.

Wet both sides of lint screen with hot water.

3.

Wet a nylon brush with hot water and liquid detergent. Scrub

lint screen with the brush to remove residue buildup.

Cleaning the Lint Screen

Every load cleaning

The lint screen is located in the door opening of the dryer. The

control panel has an indicator light to remind you to clean the lint
screen before each load. A screen blocked by lint can increase
drying time.

To clean

1.

Pull the lint screen straight up. Roll lint off the screen with

your fingers. Do not rinse or wash screen to remove lint. Wet

lint is hard to remove.

2.

Push the lint screen firmly back into place.

4.

Rinse screen with hot water.

5.

Thoroughly dry lint screen with a clean towel. Replace screen

in dryer.

To clean dryer drum

1. Make a paste with powdered laundry detergent and very

warm water.

2.

Apply paste to a soft cloth.

OR

Apply a liquid, nonflammable household cleaner to the

stained area and rub with a soft cloth until all excess dye and
stains are removed.

3.

Wipe drum thoroughly with a damp cloth.

4.

Tumble a load of clean cloths or towels to dry drum.

NOTE:

Garments that contain unstable dyes, such as denim blue

jeans or brightly colored cotton items, may discolor the dryer

interior. These stains are not harmful to your dryer and will not

stain future loads of clothes. Dry unstable dye items inside out to
avoid dye transfer.

24

Advertising
This manual is related to the following products: