General care & cleaning, Changing the oven light (some models), To replace the oven light – Kenmore 9504 User Manual

Page 15: General care & cleaning -15, Illii, Cleaning oven bottom, Some models)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

General Care & Cleaning

Cleaning Oven Bottom

The bake element is designed to be gently tilted up using your hand from the
front of the bake element. This will allow easier access to the oven bottom for
cleaning. Be careful not to raise the element more than 4 or 5 inches from the
resting position. Cleaning Oven Bottom

Oven

Light

iiiilft

fiiilifi

■ :...

I

p

illii

, C'

S'

Changing the Oven Light

(some models)

On some models, the oven light automatically turns on when the door is opened.
Some models have a switch located on the control panel to turn on the light. The
oven light is located at the rear of the oven.

To replace the oven light;

1. Turn electrical power off at the main source or unplug the range.

2. Replace bulb with a new 40 watt appliance bulb.
3. Turn power back on again at the main source (or plug the range back in).
4. The clock will then need to be reset. To reset, see Setting Oven Controls in

this Use & Care Manual.

ikCAUTION

Be sure the range is unplugged and all parts are COOL before

replacing oven light. Wear a leather-faced glove for protection against possible
broken glass.

■5»

C#
:c

1 5

Advertising
This manual is related to the following products: