To replace the oven light bulb(s), General care & cleaning, Changing oven light{s) – Kenmore ELITE 790.7943 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing Oven Light{s)
The oven lights automatically turn ON when the door is opened. The oven lights may also be manually operated by
pressing the
pad. The oven light bulbs are located at the rear of the oven and are covered with a glass shield held
by a wire holder. The glass shields must be in place whenever the oven is in use.
General Care & Cleaning
• Changing Oven Light(s)
Ü^CAUTION
Be sure the range is unplugged and all parts are
COOL before replacing oven light. Wear a leather-faced glove for
protection against possible broken glass.
To replace the oven light bulb(s):
1.
2
.
3.
4.
5.
6
.
Turn electrical power off at the main source or unplug the range.
Press wire holder to one side to release the glass shield.
Replace bulb with a new 40 watt appliance bulb.
Replace glass shield over bulb and snap wire holder into place.
Turn power back on again at the main source (or plug the range
back in).
The clock will then need to be reset. To reset, see
Setting the
Clock and Timer
in this Use & Care Guide.
Ill
;v.
Please Note:
Models are equipped with either 1 or 2 interior oven
lights. The illustration shows where they would be located.
c«
35