Installing your dehumidifier, Defrost control, Choosing the proper location – Kenmore 580.53301 User Manual

Page 7: Automatic shut off

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INSTALLING YOUR DEHUMIDIFIER

Install the dehumidifier on a level floor strong enough to

support the unit with a full bucket of water.

For best performance, allow at least 12-18 inches of air

space on aii sides of the unit for good air circulation.

> Keep all outside doors, windows, and other openings

closed when operating the dehumidifier. Humid outdoor
air will add to the unit's work load.

• Install your dehumidifier in an area where the

temperature will not fall below 65°F (18°C). At
temperatures below this, the coils can become covered
with frost, which may reduce dehumidifying
performance.

DEFROST CONTROL

When the defrost control senses frost build-up on the
evaporator coil, it will automatically shut off the
compressor. The fan will continue to run to draw air across
the coil and melt the frost. When the coil is defrosted, the
compressor will automatically restart and dehumidifying

resume.

i

11

I

m

s

CHOOSING THE PROPER LOCATION

• Use the dehumidifier in a basement to help

prevent moisture damage.

• Use the dehumidifier in cooking, laundry,

bathing, and dishwashing areas that have
excessive moisture.

• Use the dehumidifier to prevent moisture

damage anywhere books or valuables are
stored.

AUTOMATIC SHUT OFF

The dehumidifier will turn off automatically when the bucket is full, or when the bucket is removed or not

replaced in the proper position.

The bucket must be replaced in the proper position for the dehumidifier to work. The iight wiii

be on and the dehumidifier wiii not run if the bucket is not in the proper position.

- 7 -

Advertising