To set the clock, Changing between 12 or 24 hour time of day display, To set the minute timer – Kenmore 790.4773 User Manual
Page 9: To set the timer, To set add 1 minute feature, Setting the clock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Clock
Note:
The time of day
must
first be set in order to operate the oven.
To Set the Clock
The (
0
) pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the appliance is first plugged in, or when the power supply to the
appliance has been interrupted, the timer in the display will flash along with
"PF"
(power failure).
When
PF
appears in the display and 12:00 is flashing, press pad. A beep will sound and PF will disappear.
To set the clock
1. Press (O) pad. "CLO" and the current time of day will appear in the display.
2.
Press or pad to set the correct time of day. Wait 5 seconds. The new time of day will appear in the display.
Changing Between 12 or 24 Hour Time
of
Day Display:
1
.
Press and hold (©) pad for 7 seconds.
"CLO"
and the current time of day will appear in the display. A beep will sound
and
"12h"
or
"24h"
will appear in the display.
2.
Press
yv
or
-v"
pad to switch between the
1
2 and 24 hour time of day display. The display will show either
"12h"
or
"24h".
3. Wait 5 seconds to accept the change or press pad to reject the change.
4.
Reset the correct time as described in
To set the Clock
above. Please note that if the 24 hour time of day mode was
chosen, the clock will now display time from 0:00 through 23:59 hours.
T
To Set the Minute Timer
The pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will beep when the set time
has run out. It does not start or stop cooking. The Timer feature can be used during any of the other oven control functions,
except during a self clean operation.
To set the Timer
1. Press pad. will appear and
"TIMER"
will flash in the display.
2.
Press or pad to set the desired time in the display. Wait 5 seconds and the time will begin to countdown with
the set time and
"TIMER"
will stay in the display.
3. When the set time has run out,
"End"
and
"TIMER"
will show in the display. The clock will sound with 3 beeps every
7 seconds until pad is pressed.,,
To cancel the Kitchen Timer before the set time has run out:
Press pad. The display will return to the time of
day.
To Set Add 1 Minute Feature
When the (“,D pad is pressed, 1 minute is added to the Minute Timer feature if this feature is already active. If the
Minute Timer feature is not active and the pad is pressed, the Minute Timer feature will become active and will
begin counting down from 1 minute.