Adjustment procedure, Mechanical adjustment – Kenmore 385.15358 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SEWING
machíne
DIV. 20
MODEL 384. 15358
BUTTUNHOLE FUNCTION
TO CHECK:
BOTTONHOLES SHOULD BE ABOUT 3MM LONGER THAN THE LENGTH SET BY THE R
FOOT.
IF THIS LENGTH CANNOT BE OBTAINED, THEN CHECK AND ADJUST AS FOLLOWS:
ADJUSTMENT PROCEDURE:
1. OPEN THE FACE COVER (SEE PAGE 4).
2. TURN THE ADJUSTING SCREW IN THE DIRECTION OF (A) IF THE BUTTONHOLE
STITCH LENGTH IS LONGER THAN THE STANDARD,OR IN THE DIRECTION OF (B) IF
THE BUTTONHOLE STITCH LENGTH IS SHORTER THAN THE STANDARD.
3. ATTACH THE FACE COVER.
MECHANICAL ADJUSTMENT
STANDARD
25
Advertising