Floor/carpet cleaning, Height adjust knob, On/off button – Kenmore 37035 User Manual
Page 9: Handle release, On/off brushroll, Floor/ carpet cleaning, Performance indicator and dirt finder
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FLOOR/CARPET CLEANING
HEIGHT ADJUST KNOB
IMPORTANT:
For easiest adjustment,
place cleaner in full upright position.
Turn the height adjust knob to match the
bpinn
p
I
ppup
H
ON/OFF BUTTON
□
1
I
r\
Turn cleaner on by
depressing the power
on/off switch on the
front of the handle.
PERFORMANCE
INDICATOR AND DIRT
FINDER
The Performance Indicator light turns
red when vacuum needs to be serviced.
Please see Troubleshooting Section on
page 15 for Service instructions. Dirt
Finder lights up as dirt is collected. When
light turns off, the carpet is clean.
HANDLE RELEASE
To release handle, push the handle
|Jt«l]cli iLluciitdU Lrli Lliti iUVwcl
side of the cleaner.
ON/OFF BRUSHROLL
Depress pedal to turn off brushroll for
bare floor cleaning. Press pedal again to
re-engage brushroll.
Rotate the handle and adjust it to the
desired position for
(A)
storing the upright,
(B) operating the cleaner, and (C) to clean
under furniture.
NOTE:
Rotating brush
could cause area rug fringe to become
tangled within cleaner. Use caution when
vacuuming any rugs with fringe.
Use the carry handle located on the back
of the cleaner to carry from room to room.