Kenmore 385.115518 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Pick Up Your Bobbin Thread
back of the presser foot, leaving 3
to 4 inches of thread clear.
6.
Pull the thread to the left and slip
it through the thread guide.
7.
Thread then is slipped into needle
bar thread guide.
Thread needle from front to back.
8
.
NOTE:
3.
Are 3 to 4 inches of thread coming from the shuttle?
4.
Is thread from shuttle tangled?
5.
Is bobbin properly installed in the bobbin case?
6.
Is the machine threaded according to the instructions?
You may want to cut the
end of the thread with sharp
scissors for easier needle
th reading.
15
Advertising
This manual is related to the following products: