Unpacking the water filter, Parts descriptions, Small parts – Kenmore 7146611 User Manual
Page 5: Other parts of automatic iron filter only
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 1
BEFORE INSTALLING CHECKS AND TESTS
:
1B.
UNPACKING THE WATER FILTER
Packed with the filter are installation and owners manu
als, an electrical transformer and a bag of several small
parts. Automatic Iron Filter models also include a feeder
valve and the other parts shown below. You will use all of
these parts while installing the filter. So you don’t lose any
parts, keep in a safe place until you are ready to use
them. Remove the filter from the master carton. Discard
all cardboard and foam packing pieces.
Check the filter for shipping damage. If vou find damage,
report it to vour Sears store.
Use care when handling the filter, DO NOT turn upside
down, DO NOT drop, or set on sharp objects that could
make a hole in the bottom. The water filter is heavy and
to avoid damage, or personal injury, do not try to lift it or
move more than necessary. See page 13, when you are
ready to move it into installation position.
PARTS DESCRIPTIONS
SMALL PARTS
TOP
COVER
INLET-OUTLET
ADAPTOR (2)
CLIP (2)
GROUND CLAMP
OTHER PARTS OF AUTOMATIC IRON FILTER
ONLY