Char-Broil 463620809 User Manual
Page 17
ASSEMBLY
1
Hitch Pin
Qty. 2
Hinge Pin
Qty. 2
#10-24x1-1/4’’
Machine Screw
Qty. 1
#10-24
Flange Nut
Qty. 1
Left Front Leg
(Curve)
Suppo
rt Brack
et
Left Back Leg
(Straight)
Side Brac
e
Upper Leg
Hinge Pin
Hitch Pin
Left Leg
‘
Place one upper leg as shown
. NOTE: Left front and left back legs do not have leg extenders. In front, attach upper leg, side
brace and left front leg (curve) with
#10-24x1-1/4" screw and #10-24 flange nut.
‘
Attach support bracket in second hole from bottom of leg with hinge pins and hitch pins
(A).
2
#10-24x1-1/4’’
Machine Screw
Qty. 3
#10-24
Flange Nut
Qty. 3
Upper L
eg
Right Front Leg
(Curve)
Right Back Leg
(Straight)
Support Bra
cket
Leg Extender
17
Right Leg
‘
Place other upper leg as shown
. Attach upper leg and right front leg (curve) with #10-24x1-1/4" screw and #10-24 flange nut.
Tighten screws.
‘
Attach support bracket with
#10-24x1-1/4" screws and #10-24 flange nuts.