Ceramic glass cooktop cleaning & maintenance, Cleaning recommendations for ceramic glass cooktop, General care & cleaning – Kenmore 790.4292 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

General Care & Cleaning

Ceramic Glass Cooktop Cleaning & Maintenance

Consistent and proper cleaning is essential to maintaining your Ceramic glass cooktop

Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface (on

the web visit

www.sears.com

for replacement cooktop cleaner, item number 40079). Buff with a

non-abrasive

cloth or

no­

scratch

cleaning pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a

protective finish on the glass to help prevent scratches and abrasions.

Sliding aluminum or copper clad bottom pans on the cooktop can cause
metal markings on the cooktop surface. These marks should be removed

immediately

after the cooktop has cooled using the cooktop cleaning

cream. Metal marks can become permanent if not removed prior to future
use.

Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark
or scratch the cooktop surface.

Do not slide anything metal or glass

across the cooktop.

Do not

use your cooktop as a cutting board or work

surface in the kitchen.

Do not

cook foods directly on the cooktop surface

without a pan.

Do not

drop heavy or hard objects on the glass cooktop,

because they may cause it to crack.

Cleaning Recommendations for Ceramic Glass Cooktop

Before cleaning the cooktop, be sure the controls are turned to

OFF

and the cooktop is COOL.

A CAUTION

A WARNING

DO NOT

use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can

chemically damage the ceramic-glass surface.

For light to moderate soil:

Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or use a

non-abrasive

plastic type

no-scratch

pad to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly, leaving no residue.

For heavy, burned on soil:

Apply a few drops of CookTop® Cleaning Creme directly to the soiled area. Rub the soiled area using a

non-abrasive

plastic

type

no-scratch

pad, applying pressure as needed. Do not use the pad you use to clean the cooktop for any other purpose.

If soils remain, carefully scrape soils with a metal razor blade scraper, holding scraper at a 30 degree angle to the surface.

Remove loosened soils, then apply a few drops of cleaning cream and buff surface clean.

\

IMPORTANT NOTE:

Damage to the ceramic glass cooktop may occur if you use an

abrasive type scratch pad. Only use cleaning products that have been specifically de­
signed for ceramic glass cooktop.

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if spilled or melted onto the ceramic
cooktop surface. Permanent damage (such as pitting of the cooktop surface) may
occur if not removed

immediately.

After turning the surface elements

OFF,

wear a

hand mitt and use a razor blade scraper or a metal spatula to scrape the soil from the
hot surface (as illustrated). Avoid contact between the mitt and hot surface. Ailow the

Fig. 2

cooktop to cool, and use the same method for heavy or burned on soils.

13

Advertising
This manual is related to the following products: