Recall and change of settings, To recall a setting, To change a setting – Kenmore Microwave Oven User Manual
Page 17: Pause between stages, Regular timer, To use the regular timer feature, Microwave recall and change of settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
\ ■ < A V '* l•-’•i \ ’ i *■ ' ? i ^
'
MICROWAVE
RECALL AND CHANGE OF SETTINGS
To Recall a Setting
To check the Setting for a given stage, touch MEMORY/RECALL once or more until the correct Stage
Light and Indicator Light turn on. The set Time, Temperature or Oven Temperature for that stage will
show in the Display Window.
To check the Microwave Cooking Power level, touch MICRO CONTROL.
To check the Oven Temperature, touch OVEN TEMP/PRE-HEAT.
And so on.
To check Settings while the Oven is running, touch desired pad to recall Setting for operating stage.
To recall a future stage, touch STOP, follow directions above, and touch START to continue cooking.
To recall Time of Day during cooking, touch TIME OF DAY, and it will show in the Display Window.
To Change a Setting
Recall the Setting to be changed by following directions above and make the change as follows: ^
YIME.....................................................................................................Touch “0” until only one “0" shows in the
(MICRO TIME, CÒNVEC TIME, MICRO/CONVEC TIME) Display Window. Set Cooking Time.
TEMPERATURE CONTROL..............................................................Set Cooking Probe Temperature.
(MICRO TEMP, CONVEC TEMP, MICRO/CONVEC TEMP)
MICRO CONTROL............................................................................. Set Microwave Cooking Power level.
To reset to “HI”, set “99”.
OVEN TEMP/PRE-HEAT................................................................... Set Oven Temperature.
PAUSE BETWEEN STAGES
Some recipes require stirring, turning and adding or removing of foods between stages. To set the oven to
stop between stages, touch PAUSE rather than MEMORY/RECALL when setting the oven. After the
pause, to restart the oven, touch START.
REGULAR TIMER
Your Oven also has a timer that can be used for non-cooking functions. When used as a regular timer,
the Oven is not running, the timer is simply counting down.
■
For detailed instructions on using this timer, see below.
To use the Regular Timer feature:
1. Touch CLEAR.
2. Touch MICRO TIME.
3. Touch numbers for the time.
4. Touch MICRO CONTROL.
5. Touch "0” (power level 0).
,
.
6. Touch START. The time will begin counting down in the display window with no cooking or heating in
the oven.
A tone will sound and the word “End” will show in the display window for 2 seconds when the time is
over.
17