Pioneer CLD-V2600/2400 LEVEL - Manual

Chapter Two • CLD~V2600 / 2400 Level I & III
2.5 On-Screen Displays in Manual Mode
The CLD-V2600 and the CLD-V2400 display messages on the monitor using their own
internal character display. There are four designated areas on the screen that provide
the user with important status information. Three of these (Areas 1, 2 and 3) are
accessed in Manual Mode. See
Figure 2 -Q below.
Area 1 displays the Chapter
j
Frame /Track / Time E>lsplay, Area 2 displ^^ the
status of the player’s audio and speed settings, repeat mode* and CLV disc play—
indicating some buttons (such as Multi Speed) are invalid because a CLV disc is
pJa
3 ring. Area 3 indicates the Mode that has been set for the search flag, depending on
the type of disc being played. Note; Area 4 Clines 0-11 on the CLD-V2600 and lines
0-9 on the CLD-V2400) can be programmed under computer control with special user
messages. See Section 4,7,6 ÜeyísterOcmtnrf Otwiuiumds, Regrister A pages
4-39 to 4-41, for details: also spe Ttec/uiicolBulíetífi # J4I, On-Screen OserOispZcqr.
SL5.Í Areal: Chapter/Frame/Track/Time Display
Pressing the DISPLAY button on the remote control will cause the chapter and flame
numbers (LD CAV discs) or chapter and time numbers (LD CLV discs), track and
absolute time numbers (CDs) or track-index and elapsed time number of current track
(CDs) to be displayed in the upper left comer of the video monitor.
NOTE: Chapter numbers will be displayed only if they have been encoded on the
LaserDisc at the customer's request.
NOTE: Time number flame value access is possible fi-om Level HI on the CLD'V2600 &
CLD-V2400 with CLV discs, however, frame values are not displayed on screen. See
"Frame Set”, page 4-21. While both players are fulfy interactive with CAV discs and
hold CAV still flames, neither player will display a still flame from a CLV disc, flhe
Pioneer LD-V8000 player is the only one in the industry to display CLV still flames.)
M4
TP 117 V. 2.0 • 12/93 CLD-V2600
/
2400 Level I вс III User's Manual