Pioneer AVD-505 - Manual (Page 7)

0 BACK LIGHT switch
The brightness of the light built into the
display to illuminate the LCD screen (the
back light) can be set to either of two lev­
els: Bright or Dark.
Dark Bright
-Ô-
• The back light is dimmed automatically
when the vehicle’s lights are turned ON
to make the screen easy to see at night.
BRIGHT control
Controls the brightness of the image
colours on the LCD screen.
Dark Bright
VOLUME control
Controls the volume of the display speak­
er.
Softer Louder
<1
• Never set the volume so high that you
cannot hear outside traffic and emer­
gency vehicles.
@ Speaker
(D Signal receiver
This receiver receives signals from the
commander supplied with the mobile
navigation unit.
(D
POWER indicator light
This light comes on when the system
power is ON.
The colour of the LCD screen may
appear lighter or darker depending on
the angle of vision. In this case, the
brightness of the image can be adjusted
with the BRIGHT control.