Pioneer VSX-D710S - Manual (Page 36)

Controlling the Rest of Your System
Setting Up Using Preset Code
Search (VSX-D710S/D810S)
An alternative method of setting up the remote with
preset codes is to use the search feature The remote
transmits batches of 10 codes, when you see the
component responding you just scan through those last
10 codes until you find the correct one
2,4
©
® _ @
©
©!©_©_©
LED
3
® ® Cp
CD
CD <D CD
® ® ® ®
o o S ' o
<3-(Z) o
0^ ©
5 Switch the component back on or restart
playback
6 Use the A V buttons to scan through the last 10
codes transmitted to identify the correct code
The LED will blink during transmission of the code
Stop when you see the component stop or switch off
You can also verify you have the correct code by
pressing PLAY, STOP, VOL +/-, etc
7 Press and hold ENTER for three seconds to
save the preset code
The remote control automatically returns to normal
usuage
Setting Up Using Full Library
Search (VSX-D850S)
An alternative method of setting up the remote with
preset codes is to use the Library Search feature The
remote transmits batches of 10 codes, when you see the
component responding you just scan through those last
10 codes until you find the correct one
36
En
1 Switch on the component you want to
control
If the component is some kind of player (CD player,
VCR, etc ), then start it playing
2 Press and hold SETUP for three seconds
The LED lights steadily for two seconds
The remote control will also return to the previous
mode after thirty seconds of inactivity
3 Press the MULTI CONTROL button for the
component you want to control
Each button can be set to control one of the following
components
DVD DVD/LD player or DVD Recorder
TV TV, Satellite tuner or Cable TV tuner
VCR VCR or Digital Video Recorder
CD CD player
CD-R CD Recorder, Tape deck
or MD player
TVC TV or Cable TV tuner
TUN FM/AM tuner
4 Press and hold SETUP for two seconds
A batch of 10 codes is transmitted and the LED
blinks during transmission If you see the component
respond, by stopping (for playback components
only) or switching off, go on to the step 5, otherwise
repeat this step
If you want to cancel the search mode, press and
hold MUTING for two seconds
2
,
LED
LCD display
4
5
3J,8
1 Switch on the component you want to
control
If the component is some kind of player (CD player,
VCR, etc ), then start it playing
2 Press and hold SETUP for three seconds
The remote’s LCD display shows SETUP
The remote control will also return to the previous
mode after thirty seconds of inactivity