Troubleshooting, When there is no picture or sound, When there is no picture from av – Curtis LCD1988 User Manual

Page 18: When there is no sound, When the is no picture or sound, just noise

Advertising
background image

16

Troubleshooting



When there is no picture or sound

‧

Make sure the AC adapter is properly inserted in the

Power outlet.

• Reception other than those of broadcasting stations can

be considered.

• Make sure the input mode is set to TV.

• Make sure the main power switch of the main unit is

on.

When there is no picture from AV.

‧ Make sure the BLACK LEVEL is properly adjusted.
‧ The fluorescent lamp may have reached the end of

service life.

‧ Make sure the video I/P terminal is not free of

connections.


When there is no sound.

‧ Make sure the volume is not set to minimum.

‧ Make sure the sound is not set to mute.

‧ Make sure that headphones are not connected.





When the is no picture or sound, just noise.

‧ The reception may be weak.

‧ The state of the broadcast may also be bad.

‧ Make sure the antenna is not disconnected.








Advertising
This manual is related to the following products: