Clarity C410 - Manual (Page 18)

18
MEMORY STORAGE
Emergency Storage Buttons
Three emergency buttons are located on
the handset. These storage buttons can
be programmed with numbers of up to
16 digits.
Memory Storage Locations
The C410 also has 10 indirect or two
touch memory locations on the telephone
(0-9) that can be programmed to dial
frequently called numbers of up to 16
digits.
To Store numbers into memory
1. Press the MEM button.
2. Dial the number you wish to store.
3. Press the MEM button again.
4. Press either the emergency button or
the number on the dial pad that you
wish to store the number to.
5. A long beep will indicate the
programming process is complete.
During the memory storage process the
TALK
button will flash GREEN. In the
event of a power outage memory is
retained of at least six (6) hours.
To Change a Number Stored into Memory
Replace a stored number by programming
a new number in its place.
To Delete a Number Stored into Memory
1. Press and release the MEM button.
2. Press the * key once for each digit in
the number you are deleting.
3. Press the MEM button again.
4. Press the button for the memory
location you want to delete the
number from.
Operating Your Telephone
UG060205_C410_RevA.qxd 6/15/05 8:03 PM Page 18