Pioneer AVIC50S User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Installing the main unit inside the boot, on the floor under a seat, etc.,
using tapping screws
1. Fit the mounting brackets to the sides of the main unit.
2. Fix to the floor with tapping screws.
Tapping screws
(6
X
16 mm)
Drill 4 to 4.5 mm
diameter holes.
A CAUTION
Before drilling any mounting holes, confirm that the screws will not interfere
with any of the vehicle’s operating systems (such as the fuel line, brake lines,
electrical wiring, etc.).
Advertising
This manual is related to the following products: