Clarion MCD360 User Manual
Page 5
MOUNTING PRECAUTIONS
The MCD360 crossover can be mounted in any convenient location in your
vehicle that allows access to the controls and is away from moisture. The
flanges on the chassis have mounting holes which can be used as a template for
screw holes. For easy system set-up, mount the crossover so the front panel
controls will be accessible after installation.
In addition, observe the following precautions:
1. Mount the crossover on a rigid surface. Do not install the crossover on
plastic or other combustible materials.
2. Prior to drilling, make sure proposed mounting holes will not cut into the
fuel tank, fuel lines, brake lines (under chassis), or electrical wiring.
3. Avoid mounting to subwoofer enclosures or areas prone to vibration.
5
Figure 2-