Cabletron Systems 9H423-28 - Manual (Page 23)

2-7
Installing the 9H423-28 Module
The Reset Switch
The Reset switch is located on the front panel, under the top plastic tab as shown
in Figure 2-4. It serves three functions: resetting the i960 processor, shutting down
the module, or restarting the module.
• To reset the i960 processor, press the reset switch twice within three seconds.
• To shut down the module, press and hold the reset switch down for three or
more seconds.
• To restart the module after it has been shut down, press and release the Reset
Switch.
For security, SNMP management can be used to disable the functions of this
switch.
Figure 2-4. The Reset Switch
SMB CPU
Reset Switch