Curtis DVD 1084 - Manual (Page 17)

SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
S-VIDEO
INTERLACE-YUV
P-SCAN YPBPR
15
TV TYPE
16 : 9 (Wide Screen): Choose this setting if your DVD player is connected to a wide screen TV. If
you choose this setting and you don't have a wide screen TV, the images on the screen may appear
distorted due to vertical compression.
4 : 3 LB (Letter Box): Choosing this setting if your DVD player is connected to a normal ratio TV
connector. You'll see the movies in their original aspect ratio (height-to-width ratio). You'll see the
entire frame of the movie, but it will take up a smaller portion of the screen vertically.
The movie might appear with black bars at the top and bottom of the screen.
4 : 3 PS (Pan & Scan): Choosing this setting if your DVD player is connected to a normal ratio TV.
You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the
left and right edges) won't be seen.
Notes:
The image display ratio is related to the recorded disc format. Some disc can not display images in
the aspect ratio you choose.
If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and
right side of the screen.
You must adjust the screen setting depending on the type of the television you have.
PASSWORD
The password option is initially locked, and you cannot set the ratings limit or change the password.
In order for the Ratings feature work, the password mode must be turned on. If you
press Enter button to
confirm. To change the password, you will be prompted for the old password, then be prompted for
a new. Enter a 4-digit number (this is your password).
want to set the
ratings limit, you will need to enter the default password, which is 8888, then
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
4:3PS
4:3LB
16:9
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP