Cuisinart HTM-7L - Manual (Page 4)

USE AND CARE
Turning Mixer On/Off:
Plug mixer into outlet. Press on/off
switch to turn mixer ON. Mixer will
immediately begin to mix on Speed 1.
To turn mixer off, press on/off switch
again. On/off switch will pop up.
Inserting Super-Sized Beaters:
1. Unplug mixer and set the power
switch to the OFF position.
2. Insert beater with collar into larger
hole. Push beater in until it clicks into
place. Insert the beater without collar
into smaller hole. Push beater in until
it clicks into place.
Inserting Chef's Whisk
1. Unplug mixer and set the speed
control to the OFF position.
(Up position, not depressed.)
2. Hold chef’s whisk at stem end, and
insert into either hole. Push whisk in
until it clicks. DO NOT PUSH WHISK
IN FROM WIRE END, AS YOU MAY
DAMAGE WIRES.
4
2.
3.
4.
5.
6. 8.
7.
9.
1.
Larger
Hole Collar