Programming with visiontools pro-e, Example program, Infinet ex™ lcd handheld remote crestron mlx-2 – Crestron electronic infiNET EX MLX-2 User Manual

Page 18

Advertising
background image

infiNET EX™ LCD Handheld Remote

Crestron MLX-2

• Additional MLX-2 devices are assigned different RF ID numbers as they

are added.

• If necessary, double click a device to open the “Device Settings” window

and change the RF ID, as shown in the following figure.

“Device Settings: Crestron MLX-2” Window

• The ID code specified in the SIMPL Windows program must match the

RF ID of each unit. Refer to “Identity Code” on page 6.

Program Manager

Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols. The symbol can be viewed by double
clicking on the icon or dragging it into Detail View. Each signal in the symbol is
described in the SIMPL Windows help file (F1).

Programming with VisionTools Pro-e

The MLX-2 LCD screens should be created in VisionTools Pro-e (VT Pro-e) to
allow selection of functions, and control of system devices. Note that the MLX-2
design permits the 57 buttons to be programmed individually per project or for each
page in a project. The result is almost limitless functionality, with real time feedback
of commands.

Example Program

An example program for the MLX-2 is available from the Crestron website
(

www.crestron.com/exampleprograms

).

14

infiNET EX™ LCD Handheld Remote: MLX-2

Operations Guide – DOC. 6839A

Advertising