Cortelco Dignity 2420 - Manual (Page 8)

8
6. Press STORE or OK, the phone will beep and the display will show STORED
If you do not want to store a name, skip step 4
Figure 1
Figure 2
6:40 A M 03/05
0-
N U M B E R ?
Figure 3
Figure 4
6:40 A M 03/05
0295993577
M _
NOTES:
• To add a space before another word, press 1 once.
• If you make a mistake while entering the number, or name. Press to move the cursor right, press to
move the cursor left and press DELETE to delete the letter.
• Letters are always inserted to the left of the cursor
Key 1st
Press
2nd
Press
3rd
Press
4th
Press
5th
Press
6th
Press
7th
Press
8th
Press
9th
Press
1 - ’ ( ) & , . 1
2 A B C 2 A B C 2 A
3 D E F 3 D E F 3 D
4 G H I 4 G H I 4 G
5 J K L 5 J K L 5 J
6 M N O 6 M N O 6 M
7 P Q R S 7 P Q R S
8 T U V 8 T U V 8 T
9 W X Y Z 9 W X Y Z
* * * * * * * * * *
0 0 0 0 0 0 0 0 0 0
# # # # # # # # # #
PAUSE
During the memory storage procedure, press R/P to insert a pause between numbers.
Each time R/P is pressed, a ‘P’ will show on the LCD to indicate a 2 second pause in the dialing sequence. Each pause
counts as one digit.
Pressing R/P more than once will increase the pause between digits.
REVIEW A NUMBER FROM THE MEMORY
Press MEMORY (Display shows ITEM -XX-, XX is the number of memories stored in the MEMORY), enter the first letter of
the name (e.g “E” for EMMA): Press number 3 twice and scroll with
until the display shows the name and number that
you want to review.
NOTE: If the number is longer than 15 digits, the number will shift left automatically until the end of the number has been
reached. The phone will exit automatically approximately 15 seconds after the last activity.
DIALING A NUMBER FROM THE MEMORY
There are three different ways to dial a stored speed dial number, depending on your preference.
1. Pick up the handset and follow the sequence ‘REVIEW A NUMBER FROM THE MEMORY’ until the display
shows the name and number that you want to dial, and then press DIAL.
2. Press SPEAKER and follow the sequence ‘REVIEW A NUMBER FROM THE MEMORY’ until the display shows
the name and number that you want to dial, then press DIAL.
3. Follow the sequence ‘REVIEW A NUMBER FROM THE MEMORY’ and check the LCD until the correct
information is displayed. Press DIAL (the phone enters speakerphone mode and dials the displayed number).
6:40
A M 03/05
S T O R E T O ?
6:40
A M 03/05
0295993577
NAME ?