Casio CTK-671 - Manual (Page 62)

E-60
703A-E-062A
LAYER
TOUCH/TRANSPOSE/SETTING
[+]/[–]
SPLIT
TONE
Main Tone (STRINGS)
Split point
Split Tone
(PIZZICATO
STRINGS)
S t r i n g s
P i z z . S t r
SPLIT
To split the keyboard
1.
First select the main tone.
Example: To select “050 STRINGS” as the main tone,
press the TONE button and then use the num-
ber buttons to input 0, 5 and then 0.
2.
Press the SPLIT button.
3.
Select the split tone.
Example: To select “048 PIZZICATO STRINGS” as the
split tone, use the number buttons to input 0,
4 and then 8.
G 3
Split Tone (PIZZICATO STRINGS)
+
Layered Split Tone
(STRINGS)
Main Tone (BRASS SECTION)
+
Layered Tone (FRENCH HORN)
Split point
4.
Specify the split point. While holding down the
SPLIT button, press the keyboard key where you
want the leftmost key of the high end range to be.
Example: To specify G3 as the split point, press the G3
key.
A c o . B a s s
Selected split tone Lit
5.
Now try playing something on the keyboard.
• Every key from F 3 and below is assigned the PIZZI-
CATO STRINGS tone, while every key from G3 and
above is assigned the STRINGS tone.
6.
Press the SPLIT button again to unsplit the key-
board and return it to normal.
❚ NOTE
• The main tone sounds over Channel 1, while the split tone
sounds over Channel 3. You can also use the Mixer to change
the tone and volume settings for these channels.
• Split cannot be used while standing by for recording or while
recording is being performed in the Memory Mode.
• When the MODE switch is set to CASIO CHORD or FINGERED,
the accompaniment keyboard range is in accordance with the
split point you specify with the above procedure.
Using Layer and Split Together
You can use layer and split together to create a layered split
keyboard. It makes no difference whether you layer tones
first and then split the keyboard, or split the keyboard and
then layer tones. When you use layer and split in combina-
tion, the high range of the keyboard is assigned two tones
(main tone + layered tone), and the low range two tones (split
tone + layered split tone).
LAYER SPLIT