Dsf setting, Basic operations, Mute – Clarion DVS9755z User Manual

Page 6

Advertising
background image

12

DVS9755z

• MONO: monaural sound

• STEREO: stereo sound

• 2/1: 2 front channels, surround monaural

• 2/2: 2 front channels, 2 channel surround

sound

• 3/0: sound via the 3 front channels

• 3/1: 3 front channels, surround monaural

sounds

• 3/2: 3 front channels, 2 channel surround

sound

• 3/2 LFE: 3 front channels, 2 surround chan-

nels and sub woofer sound.

●

SS1: displays a dolphin.

●

SS2: Displays “CLARION” being

scrolled across the display.

●

DISP OFF: the display is off.

DSF setting

DSF (Digital Sound Field) makes it possible
through sound simulation to enjoy the acoustic
experience you would have in a concert hall or a
live performance hall.

• The initial setting is [DSF OFF].

1. Press the [DSF] button.

Each time the [DSF] button is pressed, the indi-
cations change as shown below.

[DSF OFF]

→

[HALL]

→

[CHURCH]

→

[STA-

DIUM]

→

[LIVE]

→

[JAZZCLUB]

→

[THEATER]

→

[DSF OFF]

• The original mode is resumed when the

button is not pressed during a 7 second
interval.

• HALL(Hall):Large concert hall.

• CHURCH(Church):Church with a vaulted ceil-

ing.

• STADIUM(Stadium):Large stadium without

roof or walls.

• LIVE(Live):Live performance hall, larger than

a jazz club.

Basic Operations

• JAZZCLUB(Jazzclub):Jazz club with a low

ceiling.

• THEATER(Theater):Movie or drama theatre.

2. When the [DSF] button is held down for 2 sec-

onds, the original mode is resumed.

Adjusting the sound volume bal-
ance of each speaker
(AUDIO MODE)

You can adjust the sound image to suit the seat-
ing position and number of passengers.

Press the [A-MODE] button.

Each time the [A-MODE] button is pressed, the
indications change as shown below.

[SW]

→

[CTR]

→

[BAL]

→

[FAD]

→

original mode

• The original mode is resumed when the

button is not pressed during a 7 second
interval.

●

SW (Sub woofer):

Adjusts sub woofer volume.

The volume is adjusted in the range –6 to
+3.

●

CTR (Center speaker):

Adjusts center speaker volume.

The volume is adjusted in the range –6 to 0.

●

BAL (Balance):

Adjusts the sound volume in the left and right
speakers.

The sound volume is adjusted in the range
L13 to R13.

●

FAD (Fader):

Adjusts the sound volume in the front and
rear speakers.

The sound volume is adjusted in the range
R12 to F12.

Mute

Each time you press the [MUTE] button, mute is
turned on and off.

“MUTE” appears when mute is turned on.

Control unit button operations

Advertising