Compaq iPAQ H3800 - Manual (Page 91)

iPAQ Pocket PC H3800 Series Reference Guide 91
Expanding Functionality with Cards
Use an Optional Secure Digital Card
Use an optional Secure Digital (SD) card to increase the memory capacity of your Compaq
iPAQ Pocket PC.
CAUTION: Install the SD card only into the SD memory slot on the Compaq iPAQ Pocket PC. You
cannot install this card into a Single-slot or Dual-slot PC Card Expansion Pack or a CompactFlash Card
Expansion Pack.
Install the Secure Digital card
1. Locate the Secure Digital (SD) memory slot on your Compaq iPAQ Pocket PC
2. Insert the SD card into the external memory slot
Push the connection edge of the card firmly into the external memory slot until it clicks
into place or is flush with the top of the slot
Remove the Secure Digital card
1. Close all applications and files using the Secure Digital (SD) card
2. Push down on the SD card
The SD card will pop out of the memory slot
3. Pull the SD card from the memory slot
Locate information about Secure Digital cards
Locate information about Secure Digital cards at
<http://www.compaq.com/products/handhelds/pocketpc/cfcardlist.shtml>
Tips
I cannot insert my card
1. Make sure you are not inserting the card at an angle
2. Make sure you insert the connection area first
I cannot establish a connection
1. Make sure your card is properly inserted into the memory slot on your expansion pack
2. Follow the manufacturer’s instructions to install the driver
My Compaq iPAQ Pocket PC cannot recognize my card
Perform a soft reset of your Compaq iPAQ Pocket PC
1. Insert the stylus into the unit reset switch at the bottom of your Compaq iPAQ Pocket PC
2. Press the switch for 1 second