Casio EX-Z60 - Manual (Page 208)

VIEWING IMAGES ON A COMPUTER
208
7. Depending on the version of Windows you are
running, use one of the following procedures
to terminate the USB connection.
• EX-Z60
Windows XP/98SE/98 Users
Press the camera’s power button. After making sure
that the camera’s operation lamp is not lit green,
disconnect the camera from the computer.
Windows 2000/Me Users
Click card services in the task tray on your computer
screen, and disable the drive number assigned to the
camera. Next, disconnect the USB cable from the
camera, and then turn off the camera.
• EX-Z60DX
Windows XP/98SE/98 Users
After pressing the USB cradle’s [USB] button and
making sure that the [USB] lamp is not lit, remove
the camera from the USB cradle.
Windows 2000/Me Users
Click card services in the task tray on your computer
screen, and disable the drive number assigned to the
camera. After pressing the USB cradle’s [USB]
button and making sure that the [USB] lamp is not lit,
remove the camera from the USB cradle.