Bosch BSA2..UC User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
![background image](/manuals/667647/12/background.png)
Replacing the Microsan filter
(Omitted on vacuum cleaners which have a HEPA filter.)
When should I change the filter? Each time a new box
of dust bags is opened.
■ Open the covering.
■ Pull out the filter holding fixture and open up.
■ Dispose of the old Microsan filter and insert the
new one.
■ Slide the filter holding fixture in and close the
covering.
Cleaning the motor filter
■ Open the covering.
■ Unlock the insert by pressing in the direction of the
arrow and pull out.
Remove the motor filter and clean it.
Insert the cleaned motor filter.
Advertising