Casio EX-H15 - Manual (Page 73)

73
Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
Your digital camera is equipped with a CCD shift type camera shake correction
feature and a high-sensitivity anti image blur feature. These two features work in
concert to minimize the effects of hand and subject movement.
NOTE
• Only Camera Stabilizer can be used during movie recording.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while “D Auto” or “S Image AS” is
selected. These values will appear briefly, however, in the preview image that is
displayed immediately after you shoot a snapshot.
• The ISO sensitivity setting (page 42) must be “AUTO” for “S Image AS” to work.
• Shooting while “D Auto” or “S Image AS” is selected can cause an image to
appear somewhat coarser than normal and can cause slight deterioration of image
resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• “A Camera AS” may not work properly when the camera is mounted on a tripod.
Either turn off Anti Shake or select “S Image AS”.
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Auto Minimizes the effects of hand and subject movement.
Camera AS Minimizes the effects of camera movement only
Image AS Minimizes the effects of subject movement only
DEMO
Half-pressing the shutter button demonstrates the effect of
“A Camera AS”. However, the image is not recorded.
Off Turns off Anti Shake settings
D
A
S
F