C.5 cable the terminal server to the smc system – Compaq GS320 User Manual
Page 268
C-10
SMC Installation and User's Guide
C.5
Cable the Terminal Server to the SMC System
Connect the management channel connector on the terminal server to
network adapter 2 on the SMC system.
Figure C–7 Terminal Server Management Channel Connector
1
PK-1769-00
1.
Connect one end of the BN24Q–07 cable (17–04308–05) to the management
channel connector on the terminal server (
in Figure C–7).
2.
Connect the other end of the cable to network adapter 2 on the SMC sytem
(Figure C–8). The network adapters are numbered from left to right on the
minitower; bottom to top on the desktop.
NOTE: BN24Q is a crossover cable that can be used only for a point-to-point
Ethernet connection. It cannot connect an Ethernet node to a hub. If
such a connection is required, use a BN25G cable (17–03212–xx).