Canon L360 - Manual (Page 9)

9
V SENDING TO MORE THAN ONE LOCATION
(SEQUENTIAL BROADCASTING)
A. USING ONE-TOUCH / CODED SPEED DIAL
1.
Place documents face down on the feeder
2. Press all the relevant one-touch / coded-dial numbers one right after
another
3. If there is one more destination to be dialed manually, enter the number
using the numeric 10-key pad
4. Press Start/Copy
5. Take note of “ TX / RX ” number
N.B. Please check on the MULTI TRANSACTION REPORT which
will be generated out after the broadcast is completed to ensure that
the broadcast is successful.