Campbell Hausfeld CHN70800 - Manual (Page 9)


Features
aNtI-dry FIre
This tool is equipped with an Anti-Dry
Fire feature. This prevents the Work
Contact Element (WCE) from being
pushed in when only a few nails remain.
Simply load new nail clip behind
remaining nails to continue shooting.
tetHered No-Mar deCkINg tIP
The tool is fitted with a no-mar tip which
is tethered to the tool to prevent loss
when not mounted to tool. To utilize the
no-mar tip, simply slide it over the tools
WCE.
loW NaIl INdICator lIgHts
The tool is equipped with lights on either
side of the tool near the nose. When the
nail count becomes low, the lights will
turn yellow. When the nail count is nearly
out, the Anti-Dry Fire feature will engage
and the lights will turn red. (See Loading
the Nailer section).
NaIl PlaCeMeNt laser PoINter
The tool is equipped with a laser mounted
near the nose. This can be seen through
the wide slots in the WCE and / or no-
mar tip. The laser will indicate exact
placement of the fastener.
This is a Class IIIA
Laser Product that
emits laser radiation. Do not stare into beam
or view directly with optical instruments.
BuBBle level
The tool is equipped with a bubble level
located on the head cap. This will assist
in alighning the tool for level driving of
the fastener. The bubble level will assist
in vertical and horizontal positioning of
the tool.
Getting To Know Your Framing Nailer Like A Pro
www.chpower.com
Figure 6 - Components of the Framing Nailer
Operating Instructions and Parts Manual
Adjustable Depth
Control Knob
Tethered
No-mar
Decking Tip
Bubble
Level Conversion Switch
Electronics
ON / OFF
Switch
Magazine
Quick Clear
Nose Lever
Adjustable
Exhaust
Deflecter
Low Nail
Indicator
Light Rubber Comfort
Grip
Nail Pusher
Battery Cover/
Compartment
Pusher Latch Button
Pull-out Warning
Decal
No-mar Tip
Storage
Trigger
Swivel Plug
Laser
Low Nail
Indicator
Light
Work
Contact
Element
(WCE)
Nail Loading
Area
CHN70800