Select a speaker system, Select the desired component, O q o – Kenwood RC-R0905 User Manual
Page 13: Controlling the sound in another nqm iroofllbl
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If you make connections to another room, you can use the
remote control to select source components and to adjujst
the volume (etc.) output to the other room.
' 'xiwi
RC-H0905 [En)
Keys or conirots used irs ;his operaiion.
Controlling the sound in another nqm iROOfllBl^^
Select a speaker system.
Set the remote control to the ROOM B
operation mode.
Press the FUNCTION SHIFT key
and then press the ENT (ROOM
B) key within 3 seconds.
ROOM B
FUNCTION
SHIFT
O
Select the desired component.
Press the VIDEO or AUDIO key
repeatedly to set the ROOM B
input selector to the component
you desire.
AUDIO
VIDEO
TV
o Q o
13
* Audio and video signals are output from the SECOND ROOM PRE
OUT jacks regardless of the setting of the SP, A/B and ROOM A/
B indicators.
A ON ; Select to output sound to ROOM A from the speaker
connected to the SPEAKERS A terminals. This set
ting allows you to enjoy surround playback in ROOM
A while outputting sound to ROOM B via the SEC
OND ROOM PRE OUT jacks.
B ON : Select to output sound to ROOM B via the speakers
connected to the SPEAKERS B terminals. Be sure to
turn off the subwoofer in ROOM A if one is con
nected.
A+B ON : Select to output sound to ROOM A from the speakers
connected to the SPEAKERS A terminals and output
sound to ROOM B from the speakers connected to
the SPEAKERS B terminals.
ROOM A automatically switches to stereo playback
(surround playback is not possible).
A+B OFF No sound from the speakers. Use this setting when
listening with headphones in ROOM A for stereo
sound mail playback modes or to listen in ROOM B via
the SECOND ROOM PRE OUT jacks
•The MUTE and VOLUME +/- keys let you control the sound level m
ROOM B.
Ti r Tl
ROOM B input selector
• The setting of tne ROOM B input selector also appears in the on screen
display (for 1090VR).
• The component selected for ROOM B can also be operated using the
keys on the remote control. See "Remote operation of other compo
nents" for a list of keys available with each component,
Execute the desired operations.
The remote remains in the ROOM B operation mode until
you switch back to the ROOM A operation mode.
To return to the ROOM A operation mode, press the FUNCTION
SHIFT key and then press the +10 (ROOM A) key within 3