Vizio VT470M User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VT420M/VT470M User Manual
PIP (Picture-in-Picture)
This option sets the parameters for a second (sub) screen, allowing two sources to be viewed
simultaneously.
Press the PIP key to activate this feature, a sub-screen will come up on the bottom right hand side corner
of the TV display.
Press SWAP key to switch between main and PIP screen.
The following options are available and applicable to the PIP option menu:
1.
Source - When seiect this option allows selecting the signal
source from out of the applicable choices, these choices will be
displayed on the OSD.
2. Swap - This option allows exchanging or swapping the screens,
main to sub-screen and vice versa.
3.
Position - This option allows placing the sub-screen at the
location of your choice: top left, top right, bottom left or bottom right
hand corners.
4. Size - By using this option, you will be able to select the size of the
sub-screen to your choice. The sizes are: Small (factory setting).
Medium and Large.
5. Audio - This option allows switching the audio to the sub-screen
signal source.
See below for detailed information regarding the PIP sources.
DTV/TV
AV(CVBS)
AV(S-Video)
Component 1
I
Component 2
I
HDMI
I
RGB
I
V”
- Indicates which inputs are available for PIP and POP modes.
Note: HDMI does not support 1080p in PIP feature. RGB supports up to 1024x768@60Hz in the PIP
feature.
Version 5/26/2009
49
J