Uniden UBC9000XLT User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4. Align the pins on the
CTCSS Board with
the sockets on the
motherboard. Make
sure they go
straight
into the sockets.
The 4 pin socket is
toward the front of the
scanner.
The 3 pin socket is
toward the back of
the scanner.
5. Gently push straight
down on the CTCSS
Board until the pins
are fully seated in
the sockets.
6. Carefully replace the cover and the five screws.
Note:
The tabs on the cover hook under the front part of the chassis.
46
Advertising