Cleaning your speakers, Troubleshooting, Technical information – Bose 161TM User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Cleaning your speakers

Use a damp cloth to clean your 161“ speakers. Do not use harsh chemicals or

household cleaners. Do not apply liquids directly to the speakers. If you vacuum the

front grille of the speakers, do so carefully.

Troubleshooting

If you experience problems with your 161 speakers, the following suggestions may

help. If you need additional help, contact your authorized Bose® dealer, or contact

Bose directly.

Problem

What to do

Neither speaker
plays

Check the settings on your receiver or amplifier. Refer to the owners

guide that came with it for instruction on settings.

Bass or treble is

weak

Check the tonal balance setting on your receiver or amplifier.

Only one speaker

plays

Check the balance control on your receiver or amplifier.

Check the wires connected to the speaker that does not play. Make
sure the wires are in good condition and are firmly connected. See

page 5.

One speaker still
does not play

Disconnect the wires from both the speaker and the receiver or

amplifier. Disconnect the other cord from its speaker, and connect
that end of the cord to the speaker that doesn’t play.

If the speaker still doesn’t play, the problem is in the speaker. If the

speaker now plays, continue checking for the source of the problem.

Disconnect the same cord from the amplifier or receiver. Connect it

to the other outputs on the amplifier or receiver.

If the speaker plays, the problem is in the original cord that was con­

nected to that speaker. If the speaker does not play, the problem is in

that channel of the receiver.

Technical information

Quality standard:

Syncom® computer quality control

Driver complement:

Two (2) 2.5" (6.3 cm) wide-range drivers per speaker

Enclosure:

Tuned port, molded ABS resin

Dimensions:

4.17"H x 10.93"W x 4.98"D (10.6 cm x 27.8 cm x 12.6 cm)

Compatibility:

Rated 50W lEC; compatible with amplifiers or receivers rated 10-100

watts per channel, rated 4-8 ohms

Wire recommendations:

Based on a maximum frequency response deviation of

±0.5 dB.

Gauge

18(0.75 mm^)

16 (1.5 mm^)

14 (2.0 mm")

Length

30 ft (9 m) maximum

45 ft (14 m) maximum

70 ft (21 m) maximum

Weight:

8 lbs. (3.6 kg) per pair, in the carton

Advertising