I) o, Front panel controls and indicators – Uniden MC615 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FRONT PANEL CONTROLS AND INDICATORS
(I) o
1
ROTARY CHANNEL SELECTOR-Selects the desired channel. LED Numerical
channel display shows CH-01 through CH-88.
2 MICROPHONE CONNECTOR - Receptable tor microphone connection.
3 ON/OFF VOLUME - Turns power on to radio and allows adjustment to the desired
listening level with clockwise rotation. Whenever the power is turned on, radio auto -
matically goes to Channel 16.
4 SQUELCH - is used to quiet background noise when no signal is being received. Turn
the knob just past the point at which background noise is quieted.
5 DIM/BRIT SELECTOR - This control is used to adjust the brightness o1 the display.
6 1W/25W SELECTOR - Controls transmitter output power. The 1W (WATT) position
should always be used for in-port or short range communications.
7 CHI6 SELECTOR • Provides instant CH16 by overriding Rotary Channel selector.
LED indicator and Channel display will indicate when unit is on Channel 16. But if you
press "OFF", the channel will go back to the one which had been selected with Rotary
Channel. (That is, the channel just before you pressed "CH16".) And also Channel
Display will go back to that channel.
8 TX LEDiNDlCATOR-Glowsredin the transmit mode. The transmit lamp is operated
from the actual presence of power transmitted to the antenna.
5-