Uniden MC 790 - Manual (Page 12)

GENERAL
Channels
Frequency Control
Method
Antenna Impedance
Speaker
Microphone
Channel Display
Frequency Stability
Operating Tempera­
ture Range
Shock and Vibration
Size
Weight
Controls
Connectors
Frequency Range
Lights and Indicators
Standard Accessories
Supply Voltage •
I
TRANSMITTER
Power Output
Power Requirement
Modulation
Hum and Noise
Attenuation
Audio Distortion
Spurious Emission
Output Transistor
Protection
Output Pov/er
Stabilization
Transmit 55
Receive 80
PLL synthesizer
50 ohms, nominal '
2.85 inch, 8 ohms
Rugged 600 ohms dynamic element with coiled cord
and plug-in connector
LC.D
±0.001%
± 20‘’C to + 50°C -
Meets or exceeds EIA standards, RS152B and RS204C
7-l/4"W (185m/m) x 9-5/S'l [245m/m] x 2-]/4"H
(58m/mj
.
1 6 kg
On-Off/Voiume, Squelch S Dimmer controls, Key Board
Antenna, microphone, remote speaker. DC power
156 to 158 MHz transmit
156 to 163 MHz receive
Channel Number, , 25W, IW, USA. INT, DUAL,
SCAN, MEM, Backlight Key Board & LCD.
Plug-in microphone, mounting bracket and hardware,
DC power cord, mike hanger, spare fuse, owner's
manual
13,8V DC negative ground :
25 or Ì watt [keypad selectable]
25 watts output: 5.0A О Ì3.8V DC
I watt output : 1,0A I5.av DC
FM, ±5 kHz deviation
40 dB
Less than 5% with 3 kHz deviation with 1000 Hz
modulating frequency
-70 dB
Built-in
Built-in automatic level control (ALCj