Graco 226-167 SERIES"A" - Manual

I N S T R U C T I O N S
A N D P A R T S L I S T
FORM:
306-704
P U B L . S H £ D : / - £ /
10
GALLON
PRESIDENT
HYDRA-SPRAY
UNITS
STATIONARY MODEL PORTABLE MODELS
LESS WHEELS AND SRAKC
WITH MANUAL ELEVATOR
226-161 SERIES "A"
HAS MANIFOLD
WITH DUMP VALVE
WITH MANUAL ELEVATOR WITH PNEUMATIC ELEVATOR
226-163 SERIES"A"
HAS MANIFOLD
WITH DUMP VALVE
226-165 S£R1ES"A"
HAS FILTER
WITH DUMP VALVE
226-167 SERtES"A"
HAS FILTER WITH DUMP
VALVE AND SURGE TANK
TIP OF
CUSTOMERS CHOICE
PNEUMATIC
ELEVATOR
r*
~ N.BT.
^
AIR INLET
MANUAL
ELEVATOR
I"
^N.RT.
AIR INLET
TIP OF
CUSTOMERS CHOICE
MODEL 226
ILLUSTRATED
I5“FT.
HOSE
MODEL 226-165
ILLUSTRATED
DESCRIPTION
These Hydra-Spray Units apply light materi­
als by utilizing HI&H HYDRAULIC PRESSURE THROUGH
A SMALL FLUID ORIFICE. The combination of high
fluid pressure and small orifice creates fine
material breakup without atomizing air. This
airless spraying system without heat was origi­
nally pioneered and developed by Graco engineers
to improve the consistency and lower the costs
of coating applications. The portable, truck-
mounted Hydra-Spray units wheel directly to the
work, wherever the job site...in-plant or out­
side, on rough terrain or in a remote area.
Works direct from original 1 to 10 gallon con­
tainers. Provides fast color changing for short
run work, quick mobility for constant one-color
application.
Units utilize air press\ire to (l) operate
the pump which powers the transfer of material
to the spray tip, (2) drive the agitator that
thoroughly mixes and keeps material solids in
sprayable suspension and (3) power the pneu­
matic elevator, of Models 226-165 and 226-167,
for fast, easy material container changing. No
air used to atomize the material...no pressure
on container...no possible aeration of material.
Special, air-powered, reciprocating type pump
provides continuous-duty action, ’.dth equal pres­
sure and volume delivery on both strokes. Pump
develops material pressure
28
times greeter than
the inbound air pressure. (For example: at 60 PSl
inbound air, the pump develops 1680 PSI material
pressure.)
Units are designed for high volumeprod­
uction-type spraying of protective coating paints
and similar light materials, providing a heavy,
one coat application with almost complete elimi­
nation of overspray. All units are equipped with
a material outlet manifold having a valve > for re­
circulating material or dumping sludge. -.Also
manifold has an exrtra material outlet for addition
of a second spray gun. Models 226-165 and 226-167
include a filter kit, shipped loose, which can be
easily installed in manifold to filter the materi­
al. Also Model 226-167 includes a surge tank,
shipped loose, that can be easily assembled to
manifold to eliminate material surge. NOTE: A
tungsten carbide spray tip of customers choice is
included in all units. The proper spray tip to be
used for a specific material should be detennined
by a test conducted by your local Graco Industrial
Distributor or by his recommendation from previous
experience with the same or similar material.
7 RETAlNlFOlii-UtU^REFERENtE
• MINNEAPOLIS T3, MINN.
facterji
anuKha;
NEW YORK {Loa| Iilind Citri, PHILADELPHIA. DETROIT. CHICAGO. ATLANTA, SAN FRANCISCO, HOUSTON "