Kenwood KT-8300 - Manual (Page 7)

CONNECTING INSTRUCTIONS
1. Arrange the coaxial cable 3C 2V as illustrated.
13mm
2. Mount the F-type plug on the coaxial cable 3C 2V.
Ring
Fold back the shield
net wire.
■DU
Coaxial cable
(3C 2V)
Insert the tip of the F-type plug
in
this gap until the shield net
wire is hidden within the plug.
F-type plug
3. Move the ring to the illustrated position and flatten it with pliers.
Coaxial cable
Ring
Ring Shield net
wire
Pull it by means of
pliers, etc.
Pliers, etc.
COAXIAL CABLE(75 n) CONNECTION
AM ANTENNA
The ferrite stick antenna mounted at the rear panel of the tuner
will provide satisfactory reception of local stations with strong signals.
Because the ferrite stick antenna has directive properties, its direction
should be adjusted for best reception while listening to a station.
(See Figure below)
AC cords laid adjacent to AM ferrite stick antenna may interfere
with reception. Keep them away as far as possible from the ferrite
stick antenna.
In fringe areas or in locations surrounded by steel frame buildings
where satisfactory reception cannot be obtained with the ferrite stick
antenna, an AM outdoor antenna should be connected to the AM
terminal.