Assembling the booster seat, Assembling the booster seat -10, Step 1 – Graco PD141229A User Manual
Page 9: Step 2, Step 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Assembling the Booster Seat
Step 1.
Insert armrest into base
as shown nntil bnttons
snap into slots on side of
base (Ql.
Step 2.
Select the desired
armrest height for yonr
child, then insert the
height adjnstment
screw (21 and tighten.
Repeat for other
armrest.
Step 3.
To adjnst armrests,
remove screw and press
in bntton on side of base
as shown to raise or
lower Reinsert screw
and tighten.
CHECK to make snre
armrests are secnrely
attached by polling np
on them.
o
Advertising