I screen setup, Screen setup – Uniden TL32TX1-AW User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I Screen Setup
Select the screen setup icon in the Menu screen using the
0 0
buttons and press the
B
button.
The sub-menu is displayed on the right side of the screen,
Screen setup menu screen
Sub-menu
"Screen setup” menu
Screen
Current Mode;
Full
Auto Detection:
On
Default Mode;
Panorama
Vertical Centre:
0
Overscan
Reset
Move
0^0
Select
End Q
Select the desired setup item using the □
\~v]
button in the sub-menu.
Each of the settings can bo changed by the □0 buttons.
Current Modo
This option switches the screen between Full. Normal, Panorama and Zoom.
' This setting can also be changed by pressing the □ button. (!^ page 31)
Auto Dotoclion
Sets the Wide mode during reception ol regular TV broadcasts or for video Input pictures that contain
no aspect ratio information.
Notice
• About the Auto-detection Switching Function
The auto detection switching function Is activated when WSS or ID-1 type aspect
ratio Information Is detected in the video signal.
15m
Sarn^^wstBuidar^ii^^
menu screen. (5^ page 43)
Letter Box
The screen display mode Is Zoom.
16:9
The screen display mode is Full,
OetoutI
Sets the default screen between Full, Normal, Panorama, Zoom and Oft.
(J>
3
Z
О
CO
Vertical Centre
Use this option to adjust the top and bottom picture
position for Zoom and Panorama modes.
Reset
Reset screen setup to factory settings.
Overacsn
Overscan can be set On/Off for the follow
ing; Analog, Digital, Videol, Video2, Vldea3.
Video4, HDMI1, HDMI2. Overscan reset
option is also available.
45