Connecting your antennas – Kenwood SPECTRUM 755 AV User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting your antennas
The quality of your FM/AM recep
tion depends on how well you place.
your antennas. Sg.please follow the .
instructions carefully.
Connecting the antenna wires
to the antenna jacks
I Unlock lever .
2 Insert wire
3 Lock lever
Using the AM indoor loop antenna (supplied)
Place the antenna as far away as possible from the main system, television,
speaker wires and power cords. ■
■ r
Rotate .the ante n n a u ntil you. .get the. best repeptio n.
Using the FM indoor antenna (supplied)
Use this antenna until you can install an outdoor antenna. When you do,
remove the indoor antenna. .
. .
....................................
1 Remove the insulation frojri. the wire tip, and twist the wire.tigHtly to get
rid of any lo.ose strands,
..........
2 Connect.the end of.the_wiretp the leftmost antenna jack on the neceiven
3 Fully extend the antenna, and place it along a wall or bookshelf. , .
4 Adjust the antenna to find the position that provides the best reception.
5 Attach the looped end to the.wallQr.bookshelf .. ...
16.