Kenwood DM-VH7 - Manual (Page 4)

Before operation
Before operation
I
Unpacking
Unpack the unit carefully and make sure that ail accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your
dealer immediately, if your unit was shipped to you directly, notify the shipping company without delay. Only the
consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the
unit in the future.
Keep this manual handy for future reference.
Accessories
Check that the following accessories are present.
Audio cord (2) System control cord (1) Optical fiber cable (1) Allen wrench (1)
Remote control unit (1) Batteries (R6/AA) (2) Replacementfrontfeet (2) Spacer (1)
10 Q 0 Q_0 0 0 0 0 0^
rQQDaQ'aooo 1
OQDqoidoao I
■0 0 D do oloIO'oi /
For the U.S.A.
CAUTION :
Use of controls or adjustments or performance of proce­
dures other than those specified herein may result in
hazardous radiation exposure.
In compliance with Federal Regulations, following are re­
productions of lables on, or inside the product relating to
laser product safety.
KENWOOD CORPORATION
2967-3, ISHIKAWA-CHO,
HACHIOJI-SHI, TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS
EQUIPMENT CONFORMS TODHHS
REGULATIONS NO. 21CFR 1040.10,
CHAPTER 1, SUBCHAPTER J.
Location: Back Panel
For the U.S.A.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized change or modification is made.
NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment may cause harmful interference to radio communi­
cations, if it is not installed and used in accordance with the instructions. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
- - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- - Consult the dealer or an experienced radio / TV technician for heip.
Special feature
This unit is audio equipment based on the Mini Disc format. The Mini Disc (MD) is an application of the optical
and magneto-optical technology and has the capability to record signals on discs.The operability of the MD is
equivalent to the Compact Disc (CD). The MD uses optional non-contact system so the recordings are not
degraded by eternal factors and the discs are never scratched or damaged in playback.
Digital recording volume control
Free layout
Title input & title search
Various editing features
Simplified CD recording (D.T.E.)
Simplified playback with a one-
touch operation
Sampling rate converter
The recording level adjustment which used to be possible
only with analog input signals is now available with digital
input signals.
The unit can be installed vertically on the side as well as the
conventional, horizontal installation. Much freer system set­
ting than before is now possible.
The titles of tracks recorded onto an MD can be assigned and
stored in the MD. The title search facility allows you to search
desired tracks by their titles.
In addition to usual editing modes (MOVE, DIVIDE, COMBINE
and ERASE), this unit incorporates versatile editing features
such as QUICK MOVE for reordering the tracks in an MD
simultaneously and QUICK ERASE for erasing desired tracks.
When the unit is used in combination with the CD receiver
(RD-VH7), the desired track in a CD can be recorded onto sn
MD with a single operation (O.T.E.: One Touch Edit).
Even when the unit is off (STANDBY mode of power), play­
back can be started easily by simply pressing the play key on
the front panel.
The unit incorporates a sampling rate converter to handle
different kinds of digital sources (32kHz, 44.1kHz, 48kHz).