Direct wall mounting – Uniden Cordless Telephone User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Direct Wall Mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5-feet of a working phone jack to avoid excessive
wire lengths.
• Make sure the wall material is capable of supporting the weight of the base and
handset.
• Use #10 screws with a minimum length of 1-3/8 inches, with anchoring devices
suitable for the wall material where the base unit will be placed.
1)
Insert two mounting screws into the wall, using the appropriate anchoring device,
3-15/16 inches apart. Allow about 1/8 inch between the wall and screw heads for
mounting the phone.
2) Refer to the steps on page 15 to complete the mounting process.
TOP
16