Vizio M320NV - Manual (Page 52)

1 .
2 .
3.
4.
5.
Programming your Cable or Satellite Set-Top Box
Turn on the Cable or Satellite Set-Top Box.
Press and release the CABLE button on your VIZIO universal remote control.
Press and hold the SET button until the
LED flashes twice.
Find the programming code for your Cable
or Satellite Set-Top Box and enter it using
the number buttons. If the code is accepted,
the LED flashes twice after the last digit is
entered. If the LED does not flash twice,
repeat Steps 2 through 4 with the next code
listed.
Point the remote control at the Cable or
Satellite Set-Top Box and press POWER.
The Cable or Satellite Set-Top Box will turn
off. If the Cable or Satellite Set-Top Box
does not turn off, repeat Steps 2 through 4
with the next code listed for the component
and manufacturer.
• If the codes do not work or your brand is not listed, see Searching for Device Codes on page 2.
• Sometimes a code listed will only include limited functions. Try other codes that may include
more functionality.
Searching for Device Codes
If you cannot find the manufacturer in the list or the program code does not work, you can use the remote
control to search for the correct device code.
1. Turn on the device.
2. Press the matching device button on your VIZIO universal remote control.
3. Press and hold SET until the LED flashes twice.
4. Press 9 9 1 . The LED flashes twice.
5. Point the remote control at the device and then press and hold POWER until the device turns off.
DVD Player
Home Theater
Cable Box
Satellite Box
VCR
Other
Other
Other
Reset Remote Control to Factory Settings
1. Press and hold SET until the LED flashes twice.
2. Press 9 1 9 1 9 . The LED flashes twice.
52
www.VIZIO.com