Kenwood UD-NF7 - Manual (Page 22)

Navigating iPod/iPhone/iPad from the main unit •
Only iPod/iPhone can be connected to the dock. iPod/iPhone/iPad can be connected via USB connection.
Operation
Main unit Remote controi
Note
Dock
connection/USB
connection
Dockconnection USB connection
Piay/pause ► /II
&
IPod
(W)
CD/USB
Press in the pause mode.
Pause Press in the playback mode.
Track up/down M4 ►H
e 9 e a
Press in the playback or pause mode.
If you press the button in the pause
mode, press the [►/Mj button to start
the desired track.
Fast reverse/
forward
Press and hold down in the playback
mode.
Release the button to resume
playback.
Repeat -
REPEAT
o
REPEAT
o
Press to toggle repeat mode,
(p. 25)
Shuffie - RANDOM
o
RANDOM
o
Press to toggle shuffle mode.
(p. 26)
Menu
" iPod MENU
o
iPod MENU
o
Press to view the iPod/iPhone menu.
Operation cannot be performed on
iPad.
Cursor Up/
Down
CO
CO
<:0S>
Press to select the iPod/iPhone
menu.
Operation cannot be performed on
iPad.
Enter Press to confirm the iPod/iPhone
menu.
Operation cannot be performed on
iPad.
Note
• Display content can be changed by pressing the [iPod DISPLAY/TV OUT] button.
• Operations described here depend on the generation iPod/iPhone/iPad you are using.
Do not press any buttons on iPod/iPhone/iPad when operating iPod/iPhone/iPad from the remote control. The
volume level is adjusted by turning the volume knob on the main unit, or by pressing the [VOLUMEA/V] button
on the remote control. Adjusting the volume on iPod/iPhone/iPad units give no effect.
System off (standby operation):
When the main unit is turned to standby mode, connected iPod/iPad unit will automatically turn to standby mode,
(it may take longer time.)
22