Check your connections (figure 5), S— —0, Connections – Bose Acoustimass 3 Series III User Manual
Page 6: Check your connections, Figure 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Cube Speakers
S—
—0
Bass
Modiie
^£1
Ampifier/Receiver Outputs
OUTPUTS o-m
TO CUBE SPEAKERS
+ LEFT-
mOM RECEIVER OR MVlinER
INPUTS-®
Figure 5
Make sure the wires of all cables are
connected positive to positive (-i- to
+) and negative to negative (- to -).
Check your connections
(Figure 5)
To avoid damaging your speakers, check all connections and correct any problems before
plugging in and turning on the amplifier or receiver. Make sure the cube speakers are con
nected to the bass module and not directly to the amplifier or receiver.
Check to be sure ail connections are made positive to positive and negative to negative. Be
sure wires do not touch across terminals.